JetBlack Smart Trainer App

Jetblack Volt App Screenshots 2.jpg
Jetblack Volt App Screenshots 3.jpg
Jetblack Volt App Screenshots 4.jpg

Your JetBlack Smart Trainer works with the JetBlack Smart Trainer App. Follow the links below to download and install on your devices.

APPLE IOS

Your trainer is designed to work with the JetBlack Smart Trainer App which supports devices running iOS 11 and newer.

Download The Jetblack Volt App On Apple.jpg

ANDROID

Your trainer is designed to work with the JetBlack Smart Trainer App which supports most Bluetooth® compliant Android devices running Android version 5.1 or newer.

Download The Jetblack Volt App On Android.jpg

WINDOWS / MAC

Your JetBlack Trainer is compatible with various Windows and Mac applications running on computers that have Bluetooth and/or ANT+ capabilities.

CONNECTIVITY LIGHT (LED) DISPLAY

CONNECTIVITY LIGHT (LED) DISPLAY USING BLUETOOTH 

(Once connected to your power source) 

  1. Flashing RED / BLUE / GREEN will flash to show trainer is starting up. (This process normally will complete in 2 -4 seconds after power is on) 
  2. BLINKING BLUE = Showing trainer is searching for a Bluetooth Device to connect. 
  3. SOLID BLUE = Bluetooth is connected and the trainer is active and sending signals to your device. 

TIP: The JetBlack VOLT™ will only connect to one Bluetooth device at a time. Please ensure App is properly closed before trying to connect to a different training App. 

CONNECTIVITY LIGHT (LED) DISPLAY USING ANT+ 

(Once connected to your power source) 

  1. Flashing RED / BLUE / GREEN will flash to show trainer is starting up. (This process normally will complete in 2 -4 seconds after power is on) 
  2. BLINKING BLUE = Showing trainer is available. 
  3. ANT+ is at a “ON” status, App will show connection. Blue light will continue to blink. 

LED DISPLAY WHEN PERFORMING A FIRMWARE UPDATE 

  1. Flashing RED / BLUE / GREEN will flash to show Trainer is starting up. (This process normally will complete in 2 -4 seconds after power is on) 
  2. SOLID RED indicates the JBOOTLOADER (Firmware update service) is connected 
  3. SOLID BLUE indicates the trainer is connected and uploading 
  4. BLINKING BLUE = Showing trainer has completed upload and is searching for a Bluetooth Device to connect. It is now safe to connect to your training app 
*DO NOT disconnect trainer or your device while the firmware is updating. 

UPDATING / CHECKING FIRMWARE VERSIONS

IMPORTANT: ONLY USE the JetBlack Smart Trainer App for Firmware updates
  1. Open the JetBlack Cycling App 
  2. Navigate to settings 
  3. Select ‘Firmware Update’ 
  4. Select ‘Update’ if available 

Login

Welcome to the new website, if you are already a customer please reset your password to get started. If you experience any issues please contact support on 02 4560 1200